Improvement of Impact Toughness of Biodegradable Poly(butylene succinate) by Melt Blending with Sustainable Biobased Glycerol Elastomers

Poly(butylene succinate) (PBS) was melt blended with glycerol based polyesters (PGS) synthesized from pure and technical glycerol aiming to improve the impact strength of PBS. It was found that after addition of 30 wt% PGS to PBS its impact strength was significantly increased by 344% (from 31.9 to 110 J/m) and its elongation at break was maintained at 220%. Infrared spectra of the blends showed the presence of hydroxyl groups from the PGS phase suggesting that hydrogen bonding between the phases could be responsible for a good stress transfer and an efficient toughening in the PBS/PGS blends. Scanning electron microscopy imaging showed a good dispersion of PGS phase into PBS with a PGS particle size of 10 μm and less and no agglomeration. Addition of PGS to PBS was shown to be an effective strategy for improvement of PBS impact resistance without serious detrimental effects on its thermal and rheological properties.     

Sb release characteristics of the solid waste produced in antimony mining smelting process

Sb release characteristics of blast furnace slag, mining waste rock and tailing sand were investigated in static immersion and dynamic leaching test. These three kinds of waste samples were collected from the antimony mine in Lengshuijiang, China, produced in mining smelting process. Effects of solid/liquid ratio, sample size and pH of leaching solution on Sb release characteristics were inspected based on the analysis of scanning electron microscope, pH and EC of leachate. The optimal parameters for Sb leaching of each sample were analyzed. For blast furnace slag and mining waste rock, Sb release contents increased along with the decline of solid/liquid ratio. The maximum accumulative release contents were 42.13, 34.26 mg/kg at the solid/liquid ratio of 1:20. While Sb release content for tailing sand decreased first and then increased with the reduction of solid/liquid ratio. When the solid/liquid ratio was 1:5, the accumulative Sb release content reached the most (24.30 mg/kg). Sb release content of mining waste rock increased with the drop of leaching solution pH, with the highest accumulative release content of 26.01 mg/kg at pH 2.0. Sb release contents of blast furnace slag and tailing sand showed positive correlation with the variation of leaching solution pH. The maximum accumulative release contents of these two samples were 215.91 and 147.83 mg/kg, respectively, when leaching solution pH was 7.0. In summary, Sb release capacity of the three samples in descending order was tailing sand, blast furnace slag and mining waste rock. pH and EC of the leachate in dynamic test varied independently with the initial pH of leaching solution while showing close relationship with mineral hydrolysis in the waste.     

Production of Curdlan Grown on Cassava Starch Waste Hydrolysates

Cassava starch waste hydrolysates (CSWHs) with different degrees of polymerisation, i.e., CSWHs-1, CSWHs-2 and CSWHs-3, were prepared through the hydrolysis of cassava starch waste with thermostable a-amylase from Thermococcus sp. HJ21. The prepared CSWHs were then used as a carbon source for curdlan production with Alcaligenes faecalis ATCC 31749. The amount of curdlan produced and the glucosyltransferase activity during curdlan synthesis increased more obviously when CSWHs-2 was used as the carbon source than when glucose was used. Using both carbon sources, the maximum curdlan production was observed at day 5, and the maximum glucosyltransferase activity was observed at day 4. Glucosyltransferase activity decreased thereafter, and biomass continued to increase until the end of the experiment (day 6). Results indicated that the enhanced curdlan production with CSWHs as the carbon source was highly correlated with glucosyltransferase activity.     

Violence in environmental conflicts: the need for a multidimensional approach

Although studies on environmental conflicts have engaged with the subject of violence, a multidimensional approach has been lacking. Using data from 95 environmental conflicts in Central America, we show how different forms of violence appear and overlap. We focus on direct, structural, cultural, slow, and ecological forms of violence. Results suggest that the common understanding of violence in environmental conflicts as a direct event in time and space is only the tip of the iceberg and that violence can reach not only environmental defenders, but also communities, nature, and the sustainability of their relations.     

Exploring dynamism of cultural ecosystems services through a review of environmental education research

The field of cultural ecosystem services (CES) explores the non-material benefits that ecosystems provide to people. Human perceptions and valuations change, for many reasons and in many ways; research on CES, however, rarely accounts for this dynamism. In an almost entirely separate academic world, research on environmental education (EE) explores how EE programming affects peoples’ attitudes and values toward the natural world. In this review of 119 EE research publications, we explore whether CES (and the adjacent concept of relational values) can be dynamic. We approach this via two lines of inquiry that explore whether EE may instigate this change. First, we investigate whether the EE community measures (and tries to affect) CES-related outcomes. Second, we ask: Has EE research detected changes in CES-related outcomes? We find the EE programs measure many CES outcomes (e.g., aesthetic appreciation, social connectedness), and that in most cases studies observe increases in these outcomes after EE experiences.     

The distribution and enrichment characteristics of copper in soil and <Emphasis Type="Italic">Phragmites australis</Emphasis> of Liao River estuary wetland

The aims of the present investigation were to reveal the distribution and enrichment characteristics of copper in soil and Phragmites australis of Liao River estuary wetland. The concentrations of copper in root, stem, leaf, and ear of Phragmites australis as well as in soil were determined to study the absorption capacity of copper by wild Phragmites australis of Liao River estuary wetland. The study was carried out at test pool of the Shenyang Agricultural University, and the experimental materials (soil, irrigating water and Phragmites australis) were derived from Liao River estuary wetland. The concentrations of copper in soil and Phragmites australis were 16.4441 to 49.0209 mg/kg and 0.8621 to 89.5524 mg/kg, respectively. The results indicated that the enrichment coefficients of copper in different tissues of Phragmites australis changed with the growth of Phragmites australis. The results revealed that the enrichment coefficients of copper in the whole Phragmites australis were greater than 1 at each growing stage of the Phragmites australis. The results also showed that the transfer coefficients of Phragmites australis to copper changed with the growth of Phragmites australis. The results revealed that the Phragmites australis had a good removal effect on copper from soil and had some characteristics of copper hyperaccumulator.     

The Impact of Succession Stage on Share and Traits of Clonal Plants in Abandoned <Emphasis Type="Italic">Molinion caeruleae</Emphasis> Meadows

The impact of succession stage on the share of clonal plants in the plant cover, seed rain and seedling pool has been studied in the years 2014 and 2015. The investigations were carried out in abandoned Molinion caeruleae meadows dominated by small-statured species (Patch I), tall growing large-tussock grasses (Patch II) and shrub-willows (Patch III). Although the clonal taxa dominated in the plant cover, seed rain and seedling pool, their share in subsequent study sites was quite different. The spectra of life-history traits relevant to clonality in the plant cover and seed rain were similar and did not vary significantly among subsequent locations, while they mostly differed as observed in the seedling pool. The various spectra observed in seedling pool in subsequent study sites might be due to fact that the seed germination and recruitment of offspring are strongly influenced by habitat conditions which varied remarkably in the successive Patches.     

Analyzing temporal–spatial characteristics of drought events in the northern part of Cyprus

Drought in the northern part of Cyprus has become a recurrent phenomenon. In the last few decades, Cyprus has experienced significantly severe drought events occurring periodically, and this trend is now continuing. With rainfall distribution varying considerably across the region and frequent drought conditions, the water resources, agriculture, economy and the environment have been adversely affected. This study aims to investigate spatial–temporal characteristic of drought using Standardized Precipitation Index (SPI) at multiple timescales (3, 6 and 12 months). Monthly time series of 36 years (1977–2013) rainfall data from nine weather stations are used to derive SPI values. Based on different drought categories, this study focuses on propagation of drought from one timescale to another and estimating critical rainfall values during moderate, severe and extreme drought conditions. The analysis revealed that there is a strong correlation among different timescales in detecting drought events. On average, 79 and 78% of 3-month timescale drought propagated into 6- and 12-month drought events, respectively, while 90% of 6-month timescale drought events propagated into 12-month drought events. The derived critical rainfall value for extreme droughts over a 12-month timescale was less than 255 mm/year in the town of Alsancak, while for Guzelyurt, a major citrus growing city, this figure was less than 135 mm/year. The results are validated through drought events detected at various regions of the Mediterranean basin and local flood occurrences during the wet periods and decline in water tables at drought seasons.     

Carbon and nitrogen mineralization in Vertisol as mediated by type and placement method of residue

Selection of appropriate residue application method is essential for better use of biomass for soil and environmental health improvement. A laboratory incubation experiment was conducted for 75 days to investigate C and N mineralization of residues of soybean (Glycine max L.), chickpea (Cicer arietinum L.), maize (Zea mays L.), and wheat (Triticum aestivum L.) placed on the soil surface and incorporated into the soil. The residue of soybean and chickpea had a greater decomposition rate than that of maize and wheat, despite of their placements. Higher rate of decomposition of the residue of soybean and chickpea was recorded when it was kept on the soil surface while soil incorporation of residue of wheat and maize resulted in faster decomposition. Therefore, these findings could be used as guidelines for management of crop residue application in farmland to improve soil and environmental quality.     

Development of an efficient and sensitive analytical method for the determination of copper at trace levels by slotted quartz tube atomic absorption spectrometry after vortex-assisted dispersive liquid-liquid microextraction in biota and water samples using a novel ligand

This study describes the determination of trace levels of copper by slotted quartz tube atomic absorption spectrometry after dispersive liquid-liquid microextraction. A ligand synthesized from the reaction of salicylaldehyde and 1-naphthylamine was used to form coordinate copper complex prior to extraction. All parameters that influence the output of complex formation, extraction, and instrumental measurement were optimized to enhance the absorbance signal of copper. Under the optimum conditions, about 104-fold enhancement in sensitivity was recorded over the conventional flame atomic absorption spectrometer, corresponding to a 0.51 ng/mL detection limit. The percent relative standard deviation calculated for the lowest concentration (4.8%) indicated high precision for the experimental procedure. Accuracy and applicability of the optimum method were determined by performing spiked recovery tests on urine, lake water, and mineral water samples. Satisfactory recovery results were obtained between 82.2 and 106.3% at four different concentrations. Matrix matching method was also performed to increase the accuracy of quantification, and the percent recovery calculated for 175 ng/mL was 105.14%.